Latest Microsoft MCSA 70-743 dumps exam training resources in PDF format free download from lead4pass. Get the newest Microsoft MCSA 70-743 dumps pdf files and vce youtube demo update free shared. “Microsoft Upgrading Your Skills to MCSA: Windows Server 2016” is the name of Microsoft MCSA https://www.leads4pass.com/70-743.html exam dumps which covers all the knowledge points of the real Microsoft exam.
If you want to get success with good grades then these Microsoft MCSA 70-743 dumps exam question and answers are splendid platform for you I personally review this web many times that’s why I am suggesting you this one. Download Microsoft MCSA real 70-743 exam questions and verified answers. 100% passing guarantee and full refund in case of failure.
Google drive Microsoft 70-743 dumps pdf free download: https://drive.google.com/open?id=0B_7qiYkH83VRSTF0cjE4d0Y3akk
Google drive Microsoft 70-742 dumps pdf free download: https://drive.google.com/open?id=0B_7qiYkH83VRdDZZdGwtb0lTU3M
Useful Microsoft MCSA 70-743 Dumps Exam Questions And Answers (Q1-Q20)
QUESTION 1
HOTSPOT
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2.
Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You need to identify which subnet mask you must use for subnet2. The solution must minimize the number of available IP addresses on Subnet2.
What subnet mask should you identify? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 2
HOTSPOT
You have four Hyper-V hosts named Server1, Server2, Server3 and Server4 that run Windows Server 2016. The hosts are nodes in a failover cluster.
The failover cluster is configured to balance virtual machines when a node is more than 80 percent loaded.
You need to configure the failover cluster to balance the virtual machines when the load of a node is more than five percent higher than the average for the nodes.
Which command should you run? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 3
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1.
Server1 is configured to use a forwarder named Server2 that has an IP address of 10.0.0.10. Server2 can resolve names hosted on the Internet successfully. Server2 hosts a primary DNS zone named adatum.com
On Server1, you have the following zone configuration.
The “.” zone contains the following records.
For each of the following statements, select Yes of the statement is true. Otherwise, select No.
Hot Area:
Correct Answer:
QUESTION 4
HOTSPOT
You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.
You publish an application named App1 by using the Web Application Proxy.
You need to change the URL that users use to connect to App1 when they work remotely.
Which command should you run? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 5
DRAG DROP
You have a server that runs Windows Server 2016. You install three additional disks named Disk1, Disk2, and Disk3. You plan to use these physical disks to store data.
You need to create a volume to store data. The solution must prevent data loss in the event of a single disk failure.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Correct Answer:
QUESTION 6
HOTSPOT
Your network contains an Active Directory domain named adatum.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. The domain contains three users named User1, User 2 and User 3.
Server 1 has a share named Share1 that has the following configurations.
The Share permissions for Share1 are configured as shown in Share1 Exhibit.
Share1 contains a file named File1.txt. The Advanced Security settings for File1.txt are configured as shown in the File1.txt exhibit.
Select the appropriate statement from below. Select Yes if the state is true , otherwise no.
Hot Area:
Correct Answer:
QUESTION 7
HOTSPOT
You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed. 70-743 dumps
You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Hot Area:
Correct Answer:
QUESTION 8
HOTSPOT
Your network contains an Active Directory forest named contoso.com.
You need to add a new domain named fabrikam.com to the forest.
What command should you run? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 9
HOTSPOT
You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.
You need to apply patches to Server1.
Which two commands should you run before you apply the patches? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 10
HOTSPOT
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host.
You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA)-capable.
You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. The solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards.
Which commands should you run first? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 11
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.
Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)
The DHCP scopes are configured as shown in the Scopes exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Hot Area:
Correct Answer:
QUESTION 12
HOTSPOT
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server 1 has a virtual switch Switch1.
Server1 hosts the virtual machines configured as shown in the following table.
Windows firewall on VM1 and VM2 is configured to allow ICMP traffic. VM1 and VM2 connect to Switch1.
You fail to ping VM1 from VM2.
You need to view the VirtualSubnetid to which VM1 connects.
Which cmdlet should you run on Server1.
Hot Area:
Correct Answer:
QUESTION 13
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. IPAM uses a Windows Internal Database.
You install Microsoft SQL Server on Server1.
You plan to move the IPAM database to SQL Server.
You need to create a SQL Server login for the IPAM service account.
For which user should you create the login? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 14
HOTSPOT
Your company has a testing environment that contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016. Server1 has IP Address Management (IPAM) installed.
IPAM has the following configuration.
The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit. (Click the Exhibit button.)
The group policy configurations are shown in the GPO exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Hot Area:
Correct Answer:
QUESTION 15
HOTSPOT
Your network contains an Active Directory forest named contoso.com.
Your company has a custom application named ERP1. ERP1 uses an Active Directory Lightweight Directory Services (AD LDS) server named Server1 to authenticate users.
You have a member server named Server2 that runs Windows Server 2016. You install the Active Directory Federation Services (AD FS) server role on Server2 and create an AD FS farm.
You need to configure AD FS to authenticate users from the AD LDS server.
Which cmdlets should you run? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 16
HOTSPOT
You have a RADIUS server named RADIUS1. RADIUS1 is configured to use an IP address of 172.23.100.101.
You add a wireless access point (wap) named WAP-Secure to your network. You configure WAP-Secure to use an IP address of 10.0.100.101.
You need to ensure that WAP-Secure can authenticate to RADIUS1 by using a shared secret key.
What command should you run? To answer, select the appropriate options in answer area.
Hot Area:
Correct Answer:
QUESTION 17
DRAG DROP
You have a server named Server1 that runs Windows Server 2016.
You need to deploy the first cluster node of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
Select and Place:
Correct Answer:
QUESTION 18
HOTSPOT
You have a DNS server named Server1.
The forwarders are configured as shown in the Forwarders exhibit. 70-743 dumps (Click the Exhibit button.)
The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)
The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)
Server1 does not contain any DNS zones.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Hot Area:
Correct Answer:
QUESTION 19
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.
You install IP Address Management (IPAM) on Server1. You select the automatic provisioning method, and then you specify a prefix of IPAM1.
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 20
HOTSPOT
Your network is configured as shown in the network diagram.
Hot Area:
Correct Answer:
The Following Are Some Reviews From Our Customers:
You can click here to have a review about us: https://www.resellerratings.com/store/lead4pass
Why Select Lead4pass?
Lead4pass is the best IT learning material provider. Other brands appeared early, Microsoft MCSA 70-743 dumps exam questions are not the latest and it is very expensive. Lead4pass provide the newest and cheapest questions and answers. Lead4pass is the correct choice for IT learning materials, help you pass your exam easily.
High quality Microsoft MCSA 70-743 dumps pdf practice materials and study guides download free try from lead4pass. The best useful Microsoft MCSA https://www.leads4pass.com/70-743.html dumps pdf training resources which are the best for clearing 70-743 exam test, and to get certified by Microsoft MCSA, 100% pass guarantee. It is the best choice for you to pass Microsoft 70-743 exam.
Best Microsoft MCSA 70-743 dumps vce youtube demo:
https://youtu.be/WzFt2MsqZCQ