“Implementing Cisco IP Telephony & Video, Part 1 (CIPTV1)” Exam 300-070. Here you can get the latest free Cisco 300-070 exam exercise questions and answers for free and easily improve your skills!
300-070 exam:
This exam tests the candidate’s knowledge of secure network infrastructure, understanding core security concepts, managing secure access, VPN encryption, firewalls, intrusion prevention, web, and email content security, and endpoint security using:
This exam tests learners for implementing a Cisco Unified Collaboration solution in a single-site environment. The exam focuses primarily on Cisco Unified Communications Manager.
Candidates will need to show they can configure Cisco Unified Communications Manager, implement gateways and Cisco Unified Border Element, and build dial plans to place on-net and off-net voice and video calls using traditional numbered dial plans and Uniform Resource Identifiers (URIs).
Candidates will also implement media resources, including voice and video conferences, and be able to describe how the quality of service ensures that the network provides the required quality to voice and video calls.
Follow the link to find more information about https://www.leads4pass.com/300-070.html exam.
Watch the Cisco 300-070 video tutorial online
Table of Contents:
- Latest Cisco 300-070 pdf
- Test your Cisco 300-070 exam level
- Related 300-070 Popular Exam resources
- Get leads4pass Coupons (12% OFF)
- What are the advantages of leads4pass?
Latest Cisco 300-070 pdf
[PDF] Free Cisco 300-070 pdf dumps download from Google Drive: https://drive.google.com/open?id=1lOcSH7to6MikRI767z4-p-1v4qoITLJY
Free Cisco 300-070 Exam Practice Questions
QUESTION 1
Refer to the exhibit.
A Network Administrator needs to create a SIP route pattern to communicate with Monterrey\\’s Gateway. The
Administrator does not understand why this is not working properly. Which two statements explain the issue and resolve
the problem? (Choose two.)
A. The Administrator needs to set up a SIP trunk between Monterrey\\’s Gateway and Cisco Unified Communications
Manager.
B. The Administrator should type the reload command into Monterrey\\’s Gateway
C. The issue is caused by a failure of communication between the Monterrey\\’s Gateway and Cisco Unified
Communications Manager
D. The issue is caused by incorrect protocol integration between Monterrey\\’s Gateway and Cisco Unified
Communications Manager.
Correct Answer: AD
QUESTION 2
What is the best tool to test end verify a dial plan during the implementing phase?
A. Translator X
B. CUCM Dialed Number Analyzer
C. Real-Time Monitoring Tool
D. Cisco Prime Collaboration Tool
Correct Answer: B
QUESTION 3
Which three commands show the output of an active video call? (Choose three.)
A. show vrm active_calls
B. show call active video brief
C. show voip rtp connections
D. show voice call
E. show video call summary
F. show video dsp
Correct Answer: BCE
QUESTION 4
In which two places can a calling-party transformation CSS be selected to apply transformation for calls to a phone?
(Choose two.)
A. on a softkey configuration
B. on the phone device configuration
C. on a route pattern
D. on the phone line configuration
E. on the device pool of the phone
Correct Answer: CE
QUESTION 5
Refer to Exhibit: If the user at extension 1001 dials the user at extension 2001, which dial peer is used to route the call?
A. 3
B. 2
C. 4
D. 1
Correct Answer: C
QUESTION 6
What is the difference between policing and shaping?
A. Policing: Transmit and mark, then transmit the packets. Shaping: Buffer the exceeding packets.
B. Policing: Transmit the packets. Shaping: Buffer the exceeding packets.
C. Policing: Transmit, drop or mark, then transmit the packets. Shaping: Buffer the exceeding packets.
D. Policing: Buffer the exceeding packets. Shaping: Transmit and mark, then transmit the packets.
Correct Answer: C
QUESTION 7
What are two characteristics of a Cisco Unified Communications Manager Enterprise parameter? (Choose two.)
A. It is used to configure settings for specific services.
B. It is used to define end-user authentication settings.
C. It sets initial values of device-defaults.
D. It is used to configure settings for different services.
E. It is used to define clusterwide settings.
Correct Answer: CE
QUESTION 8
What is the maximum number of call processing servers supported in a single cluster?
A. 5
B. 8
C. 10
D. 12
E. 20
F. 24
Correct Answer: B
QUESTION 9
Which configuration output indicates a properly configured T1 digital voice interface?
A. controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-24 !
B. isdn switch-type primary-ni ! controller T1 0/0/0 framing esf linecode b8zs !
C. isdn switch-type primary-ni ! controller T1 0/0/0 framing esf linecode b8zs pri-group timeslots 1-24 isdn switch-type
primary-ni !
D. isdn switch-type primary-ni ! controller T1 0/0/0 framing esf linecode b8zs ! dial-peer voice 1 pots destination-pattern
54…. direction-inward.dial port 0/0/0:23
Correct Answer: C
QUESTION 10
Which two elements are used to configure calling privileges? (Choose two.)
A. Route pattern
B. Calling search space
C. Replica
D. User
E. Partition
Correct Answer: BE
QUESTION 11
What are the two benefits of using SIP dial rules on an IP phone? (Choose two.)
A. The phone can initiate dialing without sending any signaling messages to Cisco Unified Communications Manager.
B. The phone can detect invalid numbers and play a reorder tone without sending any signaling messages to Cisco
Unified Communications Manager.
C. If dialed digits match an entry of a SIP dial rule, the dialed string is sent in a single SIP 200 OK message to Cisco
Unified Communications Manager.
D. If Cisco Unified Communications Manager requires more digits, KPML can be used to send the remaining digits from
the SIP phone to Cisco Unified Communications Manager one-by-one.
E. If Cisco Unified Communications Manager requires more digits, another en bloc message is used to send the
remaining digits from the SIP.
Correct Answer: BD
QUESTION 12
Which two feature types can be configured on Cisco Unified Border Element? (Choose two.)
A. voicemail features such as message waiting indication and notification
B. contact center features such call queuing, agent, and supervisor features
C. audio attendant
D. interworking features such as H.323-SIP interworking, SIP normalization, DTMF type conversion, and payload
conversion
E. demarcation features such as topology hiding, statistics, and billing
Correct Answer: DE
QUESTION 13
When configuring Cisco Unified Communications Manager, which configuration enables phones to automatically
reregister to a Cisco Unified Communications Manager publisher when the connection to the subscriber is lost?
A. SRST
B. Device Pool
C. Cisco Unified CM Group
D. Route Group
Correct Answer: A
Related 300-070 Popular Exam resources
Get leads4pass Coupons(12% OFF)
What are the advantages of leads4pass?
leads4pass employs the most authoritative exam specialists from Cisco, Microsoft, CompTIA, IBM, EMC, etc. We update exam data throughout the year. Highest pass rate! We have a large user base. We are an industry leader! Choose leads4pass to pass the exam with ease!
Summarize:
It’s not easy to pass the Cisco 300-070 exam, but with accurate learning materials and proper practice, you can crack the exam with excellent results. leads4pass provides you with the most relevant learning materials that you can use to help you prepare.